■ 학력
1997.2. 한양대학교 건축공학과 공학사
1999.2. 한양대학교 일반대학원 강구조 공학석사
2006.9. 일본 도쿄대학교(The University of Tokyo, Japan) 대학원 공학박사
■ 경력
2021 ~ 현재 : International Journal of Steel Structure (SCIE), Springer, Associate editor
2020 ~2021 : University of Colorado Boulder, USA, 방문교수
2013 ~2014 : University of Washington, USA, 방문교수
2012 ~ 현재 : 한국콘크리트학회, 종신회원
2018 ~ 현재 : 한국공간구조학회, 종신회원, 이사
2018 ~ 현재 : 한국구조물진단유지관리공학회 이사
2009 ~ 현재 : 한국강구조학회 종신회원, 운영이사, 평의원, 편집위원
2008 ~ 현재 : 대한건축학회 종신회원
2022 ~ 현재 : 한양대학교 ERICA, 건축학부 건축공학전공 교수
2008 ~ 2022 : 대전 한밭대학교 건축공학과, 전임강사, 조교수, 부교수, 교수
2006 ~ 2008 : 한양대학교 친환경건축연구센터 연구조교수
2003 ~ 2003 : 동경대학교 박사연구생
2000 ~ 2003 : KCC(금강고려화학)중앙연구소 금형연구팀
1999 ~ 2000 : ㈜ 원우구조기술사 사무소
■ 관심연구분야
- 강구조해석 및 설계 (Structural analysis and design of steel structure in building)
- 건축용 강소재 개발 및 특성연구 (Development and mechanical property of steel material in building)
- 탄소강, 스테인리스강, 알루미늄 합금의 건축적용과 구조적거동 (Overall behaviors of Carbon steel, stainless steel and Aluminum alloys in building)
- 볼트접합부 및 용접접합부 구조거동 (Structural behavior of bolted and welded connections)
- 강구조부재의 유한요소모델링 및 해석 (Finite element modeling and analysis for steel structural members using ABAQUS and MIDAS)
- 탄소강 및 스테인리스강 강관부재의 단순압축 거동 및 반복가력에 의한 에너지 흡수능력 평가
- 구조시스템의 효율성 (Efficiency of structural systems)
- 강재 댐퍼의 이력거동 (Hysteric behaviors of carbon steel and stainless steel slit dampers)
-아파트 수직증축 및 수평증축에 따른 강구조 골조의 강판전단벽 내진성능
■ 주요연구과제
배관용 및 기계구조용 스테인리스 강관의 건축내진구조용 강재로의 적용성에 관한 연구
2018.6 ~ / 교육부, 한국연구재단
스테인리스강을 활용한 건축물의 내진보강에 관한 연구
2018.5 ~ 2019.08 / 한국철강협회, 한국강구조학회
스테인리스강(STS) 구조설계 기준 제정 /한국철강협회, 한국강구조학회
용접재강도를 고려한 용접 접합부의 내력평가/교육부, 한국연구재단
알루미늄합금 종류에 따른 접합부의 종국거동 특성 및 설계법에 관한 연구/교육부, 한국연구재단
경량 스테인레스강 구조부재와 볼트접합부를 위한 설계 매뉴얼 개발/교육부, 한국연구재단
■ 주요논문
-BoKyung Hwang, TaeSoo Kim(교신), YoungJu Kim, JinWon Kim, A Comparative Study on Hysteretic Characteristics of Austenitic Stainless Steel and Carbon Steel Slit Dampers under Cyclic Loading, Journal of Building Engineering, 2022
-RiHa Kim, SeHyek Im, TaeSoo Kim(교신), Yunping Xi, Hysteretic Behavior Comparison of Austenitic and Lean Duplex Stainless Steel Square Hollow Section Members under Cyclic Axial Loading, Engineering Structures, 237, 112227, 2021.
- TaeSoo Kim(제1저자), SeongKyu Hong, BoKyung Hwang, JunSu Kim, Block shear capacity in cold-formed lean duplex stainless steel double-shear bolted connections, Thin-Walled Structures, 161, 107520, 2021.
- GeunYoung Kim , TaeSoo Kim(교신), BoKyung Hwang , JunSu Kim, Ultimate strength of lean duplex stainless steel single-shear bolted connections with four bolts, Thin-Walled Structures 155, 106950, 2020.
- BoKyung Hwang, TaeSoo Kim(Corresponding), An Investigation on Ultimate Strength of High Strength Aluminum Alloys Four‑Bolted Connections with Out‑of‑plane Deformation, International Journal of Steel Structures, online published, 2018.12.
- HooChang Lee, TaeSoo Kim(Corresponding), BoKyung Hwang, TaeJun Cho, Investigation on Ultimate Strength of STS304L Stainless Steel Welded Connection with Base Metal Fracture Using Finite Element Analysis, International Journal of Steel Structures , 18(4):1139–1152, 2018.12
- TaeSoo Kim, MinSeong Kim, TaeJun Cho, Parametric Study on Ultimate Strength of Four-Bolted Connections with Cold-formed Carbon Steel, International Journal of Steel Structures, 18(1),255-280, 2018.3
-Taejun Cho, David Joaquin Delgado-Hernandez, Kwan-Hyeong Lee, Byung-Jik Son and TaeSoo Kim(Corresponding),, Bayesian Correlation Prediction Model between Hydrogen-Induced Cracking in Structural Members, Metals, 7, 205, 2017.6
- Taejun Cho, Tae-Soo Kim, Patent technologies in an artificial tree, Recent patents in engineering, 11, 125-133, 2017.6
-YongHyun Cho, TaeSoo Kim, Finite element analysis on strength of cold-formed ferritic stainless steel connections with four bolts considering curling influence, Recent patents in engineering, 11, 142-152, 2017.6
- Cho, Yonghyun, Kim TaeSoo(Corresponding), ESTIMATION OF ULTIMATE STRENGTH IN SINGLE SHEAR BOLTED CONNECTIONS WITH ALUMINUM ALLOYS (6061-T6), THIN-WALLED STRUCTURES Volume 101, April 2016, Pages 43–57, 2016.4
- Kim TaeSoo, Yoo JungHan, C.Roeder, Experimental investigation on strength and curling influence of bolted connections in thin-walled carbon steel, Thin-walled structures, 2015.6
- Cho, Yonghyun, Kim TaeSoo(Corresponding),Ultimate Strength and Shear-Lag Effect of Aluminum Alloy (6063-T5) Bolted Angle Connections, International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 7, pp. 1681-1684, 2015.7
- Kim TaeSoo, Kim Minseong, Cho TaeJun, Strength of channel bolted connection with austenitic stainless steel (304 type), International Journal of Steel Structures 15(3): 719-731, 2015.09.15
- Y.H.Cho, S.H.Kim, TaeSoo Kim(Corresonding), Structural Behaviors and Curling Influence of Single Shear Bolted Connections with Aluminum Alloys (7075-T6), INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 15, No. 1, pp. 179-183, 2014.1
- Cho, Taejun, Kim Seongsoo, Kim TaeSoo(Corresponding), A Quadratic Hierarchical Bayesian Dynamic Prediction Model for Infrastructure Maintenance, Nonlinear Dynamics, 2014.04
- Kim TaeSoo, Cho YongHyun, Mechanical Behaviours and Design Strengths of Single Shear Bolted Connections Fabricated with Aluminum Alloy 7075-T6, Materials Research Innovations, 2014.04
- Kim TaeSoo, Cho YongHyun, Investigation on Ultimate Strength and Failure Mechanism of Bolted Joint in Two different Aluminum Alloys, Materials and Design, 2014.06
- TS Kim, JH Lim, Ultimate strength of single shear two-bolted connections with austenitic stainless steel, International Journal of Steel Structures, 13, 1–12 (2013)
- TaeSoo Kim, Taejun Cho, Influence of Microstructure Difference of Stainless Steels on the Strength and Fracture of Bolted Connections, ISIJ International (SCI) Vol.53 No.2 pp.365-374 (2013)
- JinSeong Lim, TaeSoo KIM, SeungHun KIM, Ultimate strength of single shear bolted connections with cold-formed ferritic stainless steel, JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A(SCIE), Vol 24(2), 120-136 (2013)
- TaeSoo Kim, H. Kuwamura, Numerical investigation on strength design and curling effect of mechanically fastened joints in cold-formed austenitic stainless steel, Material and Design (SCIE) Vol 32, 3942-3956 (2011)
- TaeSoo Kim, J.H. Jeong, T.J.CHO, The Finite Element Analysis on Ultimate Behavior of Thin-walled Carbon Steel Bolted Connections, Journal of Constructional Steel Research (SCIE) Vol 67, 1081-1095 (2011)
- T.S. KIM,et al, An Experimental Investigation on Slip Coefficient in High Strength Bolted Joints Coated with Corrosion-Resistant Zn/Al Metal Spray Method, Materials and Manufacturing Processes(SCIE) Vol 26, No 1, 14-21 (2011).
- Sung-Ho Han, Hyo-Nam Cho, Tae-Jun Cho, Sung-Woo Shin, and Tae-Soo Kim, Risk Assessments of Long-Span Bridges Considering Life-Cycle Cost Concept and Near-Fault Ground Motion Effect, International Journal of Steel Structures (SCIE), Vol 10, No 1, 51-63 (2010)
- Taejun Cho, Tae Soo Kim, Kab Soo Kyung, and Yoon Koog Hwang, Fatigue Reliability Analysis for the Crack Propagation Compared with LRFD Specification, International Journal of Steel Structures(SCIE), Vol 10, No 1, 35-49 (2010)
- TJ CHO, T.S. KIM, DH LEE, SH HAN, JH CHOI, Reliability Analysis of a Suspension Bridge Affected by Hydrogen Induced Cracking Based upon Response Surface Method, ISIJ International (SCI) Vol.49 No.9 pp.1414-1423 (2009)
- T.S.KIM, H.Kuwamura, ,SH KIM, YT LEE, TJ CHO, Investigation on ultimate strength of thin-walled steel single shear bolted connections with two bolts using finite element analysis, Thin-Walled Structures (SCIE) No. Vol.47 pp.1191-1202 (2009)
- T.S.KIM, H.Kuwamura, ,SH KIM, YT LEE, SW SHIN, TJ CHO, Investigation on Mechanical Behaviors for Bolted Connections in Carbon Steel and in Stainless Steel Using FEM, ISIJ International (SCI), Vol.48 No.6 pp.851-860 (2008)
- T.S. KIM,H.Kuwamura, TJ CHO, Prediction of Ultimate Behaviors in Cold-formed Steel Bolted Connection by the Introduction of Initial Geometric Imperfection in FE Modeling, ISIJ International (SCI), Vol.48 No.5 pp.671-680 (2008)
- Taejun Cho, TaeSoo Kim, A Prediction Model for Hydrogen Induced Cracking in a Prestressed Wire with a Fracture Analysis, ISIJ International (SCI) Vol.48 No.4 pp.496-505 (2008)
- Taejun Cho, TaeSoo Kim, Probabilistic risk assessment for the construction phases of a bridge construction based on finite element analysis, Finite Elements in Analysis and Design(SCI) Vol.44 pp383-400 (2008)
- TaeSoo Kim,H.Kuwamura, TJ CHO, A parametric study on ultimate strength of single shear bolted connections with curling, Thin-Walled Structures(SCIE) No.46 pp.38-53(2008)
- T.S. KIM,BS HAN, Numerical simulation and effect of curling on bolted connections in cold-formed stainless steel, ISIJ International (SCI) Vol.47 No.6 pp.920-929 (2007)
- T.S. KIM, H.Kuwamura, Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear, Thin-Walled Structures (SCIE) No.45 pp.407-421(2007)